Durkee Plus Station Board for Durkee Project Station

The "Plus" Station Board is designed with a steel "U" channel so it slides easily on and off the Project Station for garment applications like left and right chest designs as well as small to medium size back designs.

With a height of 14" and a width of 16.5" it will hold up to a 30cm square hoop for jacket back designs and will hold an 18cm hoop easily for left chest designs on a XXL shirt.

The "Plus" Station Board ships with 2 additional stabilizer legs.  These would attach to the Project Station to add extra stability  when the station is in the raised position.

Also included are 2 of the new Center Marking Pins. These are used on the Station Board to mark the center point of the hoop so you can use the brass bumper stops to build the fixture that hold the hoops. (To use: mark the center point on the garment and pull it onto the Station Board. Take the Center Marking Pin and reach under the garment till the head of the pin is under the center mark on the garment. slide the shaft of the Pin into a slot on the board and twist the Pin to the right to set it. The Pin will slide easily left or right for adjustment. If it is to high or low move it up or down 1 slot.)